Real Time Clock(How to interface DS1307 RTC to AT89S52 microcontroller)

WELCOME BACK ,
 This is shubham Trivedi and today i am going to design Real Time Clock using At89s52 Microcontroller.  The AT89S52 Microcontroller is the heart of this project.  DS1307  IC is used  as RTC . This DS1307 IC required I2C interface , but 89s52 is not have any I2C port on board. That makes it typical to designed. So i designed a I2C bus in program and used it to fulfill the requirements. 

Construction 

fig.1

fig.2
fig.3

          The circuit is designed in two separate parts. Fig. 1 Shows the RTC DS 1307 IC connection. This connection is done by using zero PCB. The connection is same as shown in Fig. 2.
          I used AT89s52 Development Board which i designed few months ago using Screen print technique for pcb design. The SCL pin of RTC is connected to pin  P1.1 and SDA  pin is connected to pin P1.0 of 89s52 microcontroller. LCD 16x2 is interfaced in following way.

PIN OF LCD       PIN OF AT89s52

  • D7          -    P3.7
  • D6          -    P3.6
  • D5          -    P3.5
  • D4          -    P3.4
  • RS          -   P1. 6
  • RW         -   P1. 5
  • E            -    P1.4

Working Video



Code

Program is designed in Keil uvision 5 software. Separate library files are used for each interface. please go through the readme file before proceed further. The description of each function is also available in this attachment

For any query please write us at http://electro-passion.com/contacts-us
or mail us admin@elecro-passion.com


click here to like us on facebook

Comments

Popular posts from this blog

How to Build Electronics calculator using Arduino uno and TFT Display Shield

HOW TO USE MASM 8086 ON WINDOWS 7/8.1/10